What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
08.06.2025 00:41

Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–10[John johnson John Johnson ]
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Treasury yields slide as ADP payrolls fall to lowest in more than two years - CNBC
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
(Dc diagram shown, AC is similar).
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
what exactly is a ‘surge’ protector?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
For this case there are devices called Metal oxide varistors (MOV).
Americans Are Growing Less Interested in Buying Electric Vehicles, Study Says - Road & Track
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
a photo is worth a thousand words.
At least they know the answer if they wanted it.
Why is my older sister so mean to me as if I was her enemy?
Now when you have a certain ac resistance, then a current flows in a loop.
nine
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
What is lightning?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
‘The Life of Chuck’: Never Mind the Apocalypse, Watch Tom Hiddleston Dance! - Rolling Stone
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
It also is a device that limits the change in current flow.
At one ohm, the resistor has a maximum of 1 watt power.
Has Pope Francis signed a document that gay men can now become priests?
There are two important concepts here.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
First Sentence:
Bettor banned for heckling Olympic star Thomas - ESPN
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
but this device (an Inductor) … impedes the rapid changes in the current.
The third is lightning and “how it gets conducted into a home.”
An AC voltage/ current source, and an ac inductive load.
There are three different concepts here that are getting confused.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
What is your review of Kota Factory Season 3 (TVF Original)?
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
These are simplified answers to the original question, and does not change anything I wrote above.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
A circuit breaker is similar, but is resettable.
the problem then depends on "how fast does the fuse operate?".
Capivasertib given to breast cancer patients in Wales for first time - BBC
This device then solves the entire problem.
This is where the MOV conducts again, and dissipated the energy.
The MOV will conduct when the voltage exceeds 50% of line voltage.
Barnstars:
He then describes the function of a fuse.
One
Edit 2024–10.
It seems Mohan does not understand the difference between a comment and an Answer.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
The bolt then partially travels down the line to your home.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
[image of Common-mode choke]
The other is “what does a “fuse” do?”
In schematic diagrams this is the symbol for a fuse:
One is “what exactly is in a ‘surge protector’ ? ”
He then describes Rainy Season and Lightning.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
I post the exact comment here.
But… the neutral is now “floating” because of the 1 ohm resistance.
but I think this circuit , shows a few more pieces.
Here is a simplified AC power diagram.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
A fuse is a non-resetable over current circuit protector.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–16 [ OO OLAOYE OYEBODE ]
This is 'the assistant's answer'
eight
So, the voltage could go up to 500 volts, and the fuse will not open up.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
[old diagram got deleted by accident]
But it can get overloaded, and no longer works.
Upvotes:
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
He then asserts :
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
What does a fuse do?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–10–14 [Omar Gharbi Omar Gharbi ]
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Because the load is inductive, the current lags the voltage.(by a bit).
so, what happens?
This one hit behind the barn.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”